Kit: board with a plate for installation in the machine, wiring set, 12V battery.
Mount the plate with the board on the side wall of the machine:
Connect the 24VDC wires to V+ and V- of the machine power supply :
Disconnect the standard PC power port and connect it from the UPS board:
Disconnect the PC's standard F_panel connector and connect it from the UPS board. Plug the standard connector into the wiring's socket:
Unscrew the rear lower panel of the machine. Disconnect the +/- terminals of the power connector and, in their place, connect + and - 220VDC from the UPS board; connect the standard terminals to the connectors on the wires accordingly (finished version on the right):
