Installing the GSM Module (Internet Connection)

1. Switch off the machine's

   

   ;
2. Remove the machine's rear cover to access the

   

   ;
3. Disconnect the

   

   ;
4. Unscrew the screw and remove the

   

   ;
5. Install the

   

   ;
6. Connect the

   

   ;
7. Insert the

   

   until it clicks (chip facing you) and start the machine.

Video of replacing the WiFi module with a GSM module:

▶ Video: replacing the WiFi module with a GSM module

After startup, close the ShakerView application and configure the internet connection on the machine's desktop.

1. Press the

   

   button, enable developer mode and go to the Configurator tab (Engineering menu);
2. Press "Close application" and close the system console;
3. In the top-right corner of the screen, open the system menu and select

   

   ;

4. 

   , turn on

   

   , and select an

   

   . If the access point was not created automatically, add a

   

   (access-point settings are specific to each operator).
5. If all settings are correct, a

   

   will appear on the screen.

Video of configuring the connection:

▶ Video: configuring the GSM connection

After configuring the connection,

.