How to remove a shelf
Open the door and pull the shelf towards you:
Disconnect the shelf's power connector:
Remove the shelf by lifting its rear out of the rail slots:
How to change shelf height
To change the shelf mounting height, unscrew the rail mounting screw and pull the rear part out of the slot:
At the required height, insert the rear of the rail into the slot and fix the front with the screw (a screwdriver is recommended; the screw anchors are self-tapping):
Replacing the springs
To remove a spring:
- Pull the gearbox motor wheel towards you and turn the spring on it so that the spring's corner lines up with the retainer slot;
- Bring the spring's corner out of the retainer slot;
- Tilt the spring and remove it from the gearbox wheel hook.
To fit a spring:
- Hook the spring behind the gearbox wheel hook;
- Insert the spring's corner into the retainer slot and press until it clicks;
- Turn the spring to lock it (in the same direction the cell motor turns).
Video of fitting the springs:
Reversing the motor rotation direction
To reverse a motor's rotation direction, pull out the shelf and move the motor power plug to the other socket:
